HISTORY OF DIAMONDS

The diamonds were first found in the southern part of India for the first time, in Golkunda, Andhra Pradesh, India. The main centre for trade of the amends existed there from centuries, though the diamond markets as a whole were available world over. The diamonds were found from under the masses of clay, heaps of sand dunes, in the gravel or pebble pits in the river-beds. The French traveller, Tavernier, was the first foreigner who saw during his tours in the seventeenth century the places in India where the diamonds were being mined out, cut and polished for trade. Later in 1725, in Brazil the diamond mines were discovered beside the gold mines there. However, the natives there did not know that the objects which they used for bettings in the game of cards, as entertainment, were indeed the top jewels in the human world. The utility of the diamonds and their importance were first appreciated when an experienced gemologist’s eye fell upon them.

During those days, Brazil was being ruled by the Portuguese rulers, who had started realizing levies from the mine owners. That was an exercise which the Brazilians never liked and the quantum of work in the mines had begun falling. Consequently, the profit shares plummeted rapidly. However, after Brazil won its independence this obstacle was soon removed.

Till 1867 the diamonds were being traded between India and Brazil. It was about this time when almost coincidentally the mines of diamonds were dis­covered in South Africa. A farmer there once had found a piece of very shining stone. Examined, it was found to be a piece of diamond. About two years later once again another local boy found a stone of similar nature and look. Later, this stone was sold at the rate of eleven thousand pounds. Soon the word spread rounds and the people came to learn about the diamond mines in that locality. The search for more mines began seriously. Later many more diamonds were found, and the entire locality soon turned into a large town­ship, named as, Kimberly. Even today, world over, Kimberly is reputed to be a special place as one of the largest diamond trade centres.

In South Africa, the diamonds were found first on the surface of the ground itself. The mines were discovered later, and ever since thereafter, the diamonds were being mined out for trade. More the hauls from underneath rose, more the sophisticated machines were pressed into service for the mining purposes. Many companies came into the picture to give a highly organised shape to the entire mining business by investing capital. One Cycil Rodes opened a prospective company named, De Beers Mining Company. Later, this company expanded to become the famous De Beers Consolidated Mining Company. It purchased most of the mines in the country, and today the com­pany is reputed to be the most established name in the production of diamonds world over. In the trade of the rough or uncut diamonds the largest centre is in London. The rough diamonds are distributed from there to people who would cut these and also deal in these.

In 1893, a company was established in the name of London Diamond Syndi­cate, which started to deal in and import the rough or uncut diamond slabs from South Africa in an organised fashion. For good many years the trade continued successfully for the London-based house, with utmost efficiency however, many more the mines were being discovered soon and the production of diamonds increased in South Africa. The government there began realizing the importance of creating more balanced and organised system for distributing rough diamond slabs. In 1929, therefore, a governmental agency was incepted and named as Diamond Control Board. In 1930 another corporation was incepted and named as Diamond Corporation Limited, which soon bought up all the rights & liabilities of the London-based diamond syndicate. Another company also came into existence soon, which took over the responsibilities of distributing the black diamonds, industrial diamonds and the borts. However, the latest named was soon closed, in 1932, and all the distribution jobs were transferred to the jurisdiction of the Diamond Corporation. The native producers of diamonds, who had started many organisations were now under pressure to create a Diamond Trading Company Limited, a company for themselves, to trade the entire diamonds produced in the country.

In the African continent, apart from the South Africa, the diamonds are also found in countries in south-west areas of the continent. In some places the diamonds were found even at about one-foot depth under the ground. How­ever, the gems or the jewels found there are rather small in size and are tinged with reddishness. These are not as much precious even. As it is, the continent today is the principal production centre of diamonds. About 95 percent diamonds world over are produced here.

In the African mines, diamonds are also found in the shapes of pipes and rods. In India and Brazil if the diamonds are found even weighing over two hundred carats, the place would be famous over night. But Africa had mined out a rough diamond slab weighing three thousand one hundred six carats, the heaviest or produced so far and the record still continues unbroken. There also hangs a tale. It is said, the famous gemologist Joseph Asscher was invited to cut that huge slab of diamond. He had taken months inlooking for the easiest process to cut that. When indeed, one day, he embarked upon the job, the iron-lade instrument he was using broke, but the diamond remained unscratched. After some days when again he approached the job in a highly organized plan and pre-thinking and was actually able to cut that, he dropped unconscious onto the ground, having seen the chiselled slab.

In Zimbabwe also, in the dried beds of some ancient rivers, the diamonds used to be found. The place was Gwallow in the jungle of Somabul. The diamonds here were found assorted along with the topazes, blue sapphires, crysoberyls and others. The diamonds were also found in the West African Gold coast, Congo, and Angola. Here too these were found beneath the dry river beds. These are generally small and retain good moisture. However, in Congo about 66 percent cases the stones are not really gems.

In the New South Wales mines too the diamonds were found. However, production or mining there was suddenly reduced. In Borneo also diamonds were being mined, which was gradually minimised owing hardness in the stones.

In South American countries and British Guyana, high quality diamonds are still being mined. These diamonds weigh about ten to fifteen carats. In Sierra Leone and Tanzanika also high quality diamonds are being mined. The diamond mines also exist in Queensland of Australia and Arakans, Indiana and California in United States.

In India the diamonds were mainly found in Panna locality in Madhya Pradesh. Other areas near Panna for such deposits are Charwari, Kothi etc. In southern Indian locale Golkunda the diamonds were first found. Though these mines are now closed, in some small places in Chennai the diamond deposits are still being located. The places in southern Indian territories, where the diamond deposits have been found are: Anantapur, Bellary, Belpally, Maalpilli, Petyal, Kothpetta, Wahapa, Gurupur, Guntur, Margal, Mulvaram, Polylitt, Gotpilly, Usttapally, Karnool, Bannur, Wastpur, Gurumphot, Devnur, Dhoni, Gajetpilly, Gudiyad, Madhvaram and Pollur. Some diamond deposits were also found in Kalahandi, Palman Khima and Sambalpur region in Orissa. However, considering the production level in the other countries world over, especially that in South African mines, Indian production level is very low. There is a great difference between the products of Golkunda and those from South African mines. The diamonds mined out from Golkunda mines have elasticity, shine and high degree of attractiveness. Comparative to these the diamonds from South African mines generally retain less elasticity and low degree of attractiveness.

INDUSTRIAL DIAMONDS

Some diamonds simply called the Industrial diamonds are used in various industries but not worn on person, nor are drawn to the humans. These are used mostly by all industries. These diamonds are used in machines for construction of the high-rise buildings, roads and bridges, breaking the massive rocks, drilling the ground to mine out oil from ground oil-wells. Months used to be spent for all these before, but now the help of the industrial diamonds in these machines, these jobs are accomplished within days. The industrial diamonds have made the task of the machines highly approachable. These industrial diamonds are also of two types, transparent and opaque.

However, the good quality diamonds never meet wear and tear, nor do these get scratched and destroyed, but the industrial diamonds soon are destroyed after some times, and meet natural wear and tear. These are of four types:

(a) Miniscule Industrial Diamonds: These are very hard, but their colour is seldom catchy. Hence these are used in making the dyes or for making the cutting-machines.

(b) Rough or Bort Diamonds: These are highly defective diamonds, created in unnatural processes. Not always are these studded in ornaments. The rough diamonds used to make the cutting-machines and are considered possessing the best quality among the industrial diamonds. These diamonds are also best used in glass-cutting machines, rock-breaking apparatuses etc.

(c) Round Diamonds: The diamonds which are very small in size and round are also used for various industrial purposes like glass cutting machines etc.

(d) The Black diamonds or Carbonado: These are highly strong, dense, black or slate coloured diamonds used mostly for deep drilling, or deep digging purposes in apparatuses or in the laithe machines. Its specific density is generally slightly lower than the gems and real diamonds somewhere between 3.15 to 3.29. During the World War II black diamonds was very much known to man and its utilisation graph had wonderfully gone high.

ARTIFICIAL DIAMONDS

Like all the other gems and jewels the diamonds too have to be studded with some ornaments. This not only spruces up the native's physical look but also ensures mental balance and boosts egotism. However, the real gems or jewels are highly expensive, among these the real diamonds are the costliest and, consequently the common people have to go for the lower priced ones, which are artificially made. Many times, the inferior quality gems and jewels are given artificial colours through chermcal processes, and with application of heat, pressure and radiation treatments, the inexpensive diamonds are manufactured. These are called simulants or imitation jewels.

In the ancient texts of Garuda Purana, it is mentioned in the 68th chapter as:

Ayasa pushpraagenha tathaa gomedekena chau; Vaidoorya sphatikaabhyaancha kaachaishchau prithgwithaiih; Pratiroopaani kurvanti vajrasya kushalaaha janaha.

That means, The clever people create diamonds out of iron, yellow sapphire, heassonite, vaidoorya, crystal and glass pieces. That also means, even during the ancient times, the wearing of aritificial ornaments was very much in vogue. At present, the technique has improved only.

There are four types of man-made artificial diamonds: (i) synthesised, (ii) reconstructed, (iii) Imitation, and (iv)Dwik or Trik (doublets and triplets).

(i) The Synthesised diamonds have never since been made enough to give the trader good profits. In 1955, for the first time an attempt was made to create synsthesised diamonds by inducing more than one lakh elemental pres­sure on assorted granules of graphite. That process was made by treating the compound with 2700 degree heat. However, no such synthesised diamonds have since been made which can substitute for a real piece of diamond.

(ii) The Reconstructed diamond pieces too have not yet been made since the first time. For a success at this job, at least one thing is certain that the jewellers would have to smelt which is actually impossible.

(iii) The Dwik diamonds are made of synthesised tiles and synthesised blue sapphires.

(iv) The Imitation diamonds are manufactured from the glass and crystals.

DIAMOND-CUTTING AND MAKING FOR ORNAMENTS

Diamond slabs as are found in the pits are not exactly called the diamonds, because only some parts of the slabs retain the qualities of the jewel. Hence for the sake of making ornaments, these are required to be cut, which eventually rises up the prices of the diamond pieces.

These days a method called 'Brilliant Cut' is applied to chisel the diamond slabs. The 'brilliant cut' was first introduced by the end of the seventeenth century. This used to ensure unique shine and brilliant radiance in the diamonds. There are such terms associated with the process of 'brilliant cut' as patal Annek (meaning the cut from the upper side of a diamond slab and kulet Annek (meaning thereby, the cut undertaken in the lower part of the slab to the extent of 56 degrees). The degree of the top portion, that should be allowed against the waistline of the slab should be 35 to 37, and that of the bottom side of the slab set against the waistline should be 42 degrees.

THE DEFECTS IN DIAMONDS

The following defects were identified in the ancient books of Garuda Purana.

1.Spots - The diamond pieces with spots like water marks make the piece defective. If the spots are red that must always be rejected.

2.Black Signs - If the diamond pieces would have the black stamps like the clutch of a crow, that is said to have been as inauspicious as the life-takers.

3. If the diamond pieces were having the island-type imprints on their masses, which could be of four colours such as white, yellow, red and black, were con­sidered inauspicious.

4. If the diamond pieces had acquired many unwanted elements in their sides, cones and middle of their masses, those were considered inauspicious.

5. If there were any of the four types of lines, such as: lines going through the left side, going through the right side, crossing a line, or crossing the line and going upwards, then of these four the first one is considered of good quality. Apart from these, the pieces with oiliness, yellowish pale­ness, grayness, depression on the masses, cracks, lack of shine, and high rough-ness are all considered defective diamonds.

FORMS OF DIAMONDS

The diamonds mined out generally have twelve faces. In India the diamond pieces have by and large eight faces and in Brazil's mines the diamond pieces are uneven or tetrahedral. If viewed through a triangular magnifying glass the trigonal marks or depressions can be seen. Almost all diamond pieces lack electricity conductivity. However, when rubbed it generates electricity. But it allows heat to pass through it without itself being heated, which is why when touched it feels cold.

By applying high heat energy diamond pieces get decolorized, but when cooled the original colour returns again. It is said that you can read a book under the light of a piece of Diamond: Put a piece of diamond in a vacuum glass test tube. When the electric charge would be given to tube, the diamond would exude so much light that you can even read a book under it. It is because the pure diamond piece is transparent and allows light go through it easily, which an impure piece of diamond does not do. The diamond pieces are also transparent under the X-rays, which the impure pieces of diamonds are not. This easily differentiates between the pure and impure diamonds.

PROPERTIES OF DIAMOND

There are diamonds called Hansmukhi Diamond resembling goose-mouth shapes. Actually the diamond blocks are found in almost similar types, say those in hexangular or eight-angled shapes are always found to be attached to others which are of the same shapes.

As the diamonds are the hardest, no object can scratch through its mass. Its refractive indices are the highest, which is why the rays that penetrate its mass very easily can return in total after some time, and the effect in its dazzling power is the greatest among all other gems. The radiation power in the diamond pieces are so great that if you look down from its peak into the depth of the jewel the entire vibgyor or the sun would be Nearly visible in full colours. According to the Garuda Purana, if the sides of a piece of diamond is broken yet there remain some points and lines and the tinges of rainbow still visible, that piece is auspicious enough to bless the native with prosperity and heirs.

It is India which first proved that even the hardest and the most adamant pieces of diamonds can be polished. This art was discovered as early as in thirteenth century by the Indian jewellers and gemologists. According to documents left by the famous French jeweller, Baron Twenyar, in India the pure and defectless diamonds were not cut, it is the impure and defective diamonds which were cut and polished to their beautiful majesticity. Indians should " pride in the fact, even pretty before the Western civilisation got going, that is the sixteenth century, the diamonds were in the trade practices India and all the cut and cleaned diamonds were being exported. During the medieval period in India the diamonds were crowning the international trade.

DIAMOND-KING OF THE GEMS

It is well understood that any unique thing that stands out of other average equals are gems or in Sanskrit Ratna. Even our ancient kings and emperors used the best and the most talented people of their assembly as Ratnas or gems. In the metamorphic world the three special qualities transcend one object to the level of a gem. These qualities are beauty, durability and rare availability. If an object undergoes wear and tear very easily that cannot be fit for procurement or such object cannot be called a gem.

We cannot compare any high quality diamonds with the ice-block or a transparent crystal piece for the obvious reasons. Hence considering the beauty of the mass, rare availability and tremendous durability, the diamond pieces can easily be called the most dependable crown among the jewels. The irony is, after mined out of its metamorphic base, say weighing about five tones of ore is mined in order to produce a few carats of diamond.

THE INVINSIBLE AND UNIQUE

The diamonds do not only have any equal among the metamorphic rocks but is unique even among all the procureable objects on earth. It is indeed the Vajra, the thunder, owned by the Gods' king, Indra, which is made of the diamonds. The Vajra is such powerful that by its dazzling thunderous strokes of lightning its cleaves any density of the clouds and down the life-sustaining downpour to create the streams, rivers and seas.Diamonds is attached to thunder and the Lord Indra for several justified reasons. It is said; Lord Indra has killed the demon king, Wali, by hurling the vajra or thunder and got many new gems and jewels.

It is also said in Indian mythology, when Lord Indra failed to conquer another demon king Vritrasoor, then he went for years of penance to win the blessings and suggestion that there lived a pious and humanity's well wishing saint named, Dadhichi, who agreed to part with his bones, could help make the weapons that would kill the demon king. Indeed, the weapons out of these bones are considered the Vajra, the invincible weapon for any demons for that matter. Found in the metamorphic shapes these jewels have been named by the Sanskrit scholars as Vajra. Even in English the word diamonds' is a derivative of the Latin word 'admas' which actually means invincible.

POPULAR NOTIONS ABOUT THE DIAMONDS

It is believed that since a diamond piece cannot be broken, if it is put under the hot goat-milk for some time and then try to break it, it yields to the pressure. In ancient times diamond used to be worn on person as an amulet, for self-protection and it is also believed that diamond pieces mitigate the fever.

Some diamond pieces bode unhappiness to its na­tives, as we may find in the lot of Mary Antoinate, the former empress of feudal France as she was bayoneted after she had worn it. The famous diamond piece Kohinoor also became actually ill-famous, as it always brought destruction to the natives. All the Mughal emperors whoever owned it met with unceremoni­ous death, mostly by slaughter. The last owner of the diamond was the Punjab's Maharaja Ranjit Singh, who too had the diamond the reason for his death. Nobody put it on person after his killing and the same year the Kohinoor changed its owner once again and this time even crossed the seas to reach the Empress Victoria, to whom the diamond was sent by the British troops in India as a gift. However with its arrival the burning sun of the Great Britain’s empire slided to set for good. At present the diamond piece, Kohinoor, is preserved in the British Museum of the British royal family.

VALUATION OF DIAMONDS

Sage Varahamihira had also valued diamond and estab­lished a standard for the purpose. Eight seeds of mustard forms one grain of rice. The diamond piece weighing equivalent of 20 such grains of rice should cost two lakhs of kasharpana (Value used during that periods). Indeed a highly expensive jewel, diamond's prices continue to go up upto twelve rattis and after that at each three rattis, its price just doubles.

(The conversion table for various weighing systems for gemstones is:

1 Gram = 5 Carats = 1000 Milligrams

200 Milligrams = 1 Carat or = 100 Cents

182 Milligrams = 1 Standard Ratti (Stones Ratti)

It is advisable if the stones are bought as per their weight in Carats as it is a standard term throughout the world. But in India, many times you get stones made following the system of Savaya and sold in their weight as Rattis. This should also be acceptable.

(Cf. Ratna Aur Jyotish, Page 39).

DEFECTIVE DIAMONDS

The Sages of the ancient times have identified many demerits which should enlighten the native about the authencity of a diamond piece. These are: 1. Paleness, 2. Yellowish ness, 3. Lined, 4. Full of Depressions in the Mass, 5. Oily, 6. Glaze less, 7.Extremely Hard, 8. Dotted with Black Bubbles, 9. Having White Dots and having the Sign of a Crow's Claws. This apart, the diamond pieces with red dots are highly injurious. It is called a killer diamond. Diamond piece with the look of a fly, having hair like lines, with the blotches of clay in the mass, stray granules of solid dust, burnt, blemished, without lustre, and brittle-type diamond would seldom ensure happy results. Similarly, the diamond pieces spotted with water bubbles are also not auspicious.

BENEFITS OF WEARING THE DIAMONDS

Sage Varahamihira suggested that as the diamonds are highly attractive, the women get easily attracted towards it. Women who are longing to give birth to a male child should not wear any type of diamonds. If the diamonds are sized like three spots ar triangular like water chestnuts or like paddies, then such diamonds would be very auspicious.
Wearing the inauspicious looking diamonds might cause estrangement with friends, wealth and even life whereas wearing the auspicious diamonds would ensure relief from the fear of thunder or unexpected misfortune, poison, enemies and would also increase wealth.
He further suggested that Brahmins should wear the white diamonds, the warriors, or Kshatriyas should wear the diamonds coloured as the flowers of the Shirish trees and the Shudras or for them doing other jobs the blue diamonds would be beneficial.
(cf:Ratna Pradeep;Chapter 8;Page 88 and Brihat Samhita;Chapter 79;Ratnapareekshadhyaya;Shlokas 11-17;Pages 489)

WHERE THE DIAMONDS ARE FOUND

As stated in Brihat Samhita as per Varahamihira pure diamond pieces were found on the banks of Beno river. Especially mentioned about the Kosha region where the diamonds were found almost like the flowers of the Shirish tree. Slightly reddish in colour in the Saurashtra region, in the Suraparaka region a bit blakish, in the himalaysn hills slightly red, in the matangs region as valla flower type, in the Kalings region yellow coloured and in the Pundra region dark coloured diamond pieces were excavated.
(cf: Brihat Samhita;Chapter 79;Ratnapareekshadha;Shlokas 5-8;Pages 489).

CHARACTERISTICS AND TESTING AS IN ANCIENT TEXTS

Among the stones and gems, diamond is the hardest, brightest, transparent and the most precious.
Varahamihira has termed the diamonds as Vajramani, and defined its characteristics as the jewel which is as hard as Vajra, that radiates rays when put into a shallow water and the rays float, which is as pure and genuine as electricity, which ensures happiness to all, like the rainbow and fire does naturally.
(cf: Brihat Samhita; Chapter 79; shlokas 1-5)

Powered By Blogger
Google

http://rpc.technorati.com/rpc/ping

http://rpc.technorati.com/rpc/ping